Wet Umbrella Dryer Australia Assembly Instructions WUDA Models

1.    Place base on the ground and slide the side panels into place with tab on the inside.
2.    Screw in 8x M6 Stainless Bolts with split washers into place. Check alignment and tighten bolts. See photo below.
 
3.    To Empty drip trays, just take the elastic strap off and slide out from front to back.
4.    Microfiber pad washing. Just use laundry liquid on cold wash. DO Not wash hot or use fabric softeners.
5.    All parts and available. If you need any further assistance, please contact us at info@wet-umbrella.com