Wet Umbrella Holder Made in Australia Model A WUHAA-400

WUDAA-400

Wet Umbrella Holders are Made in Australia from 3mm thick 6060 Aluminium and welded together to last in a tough commercial environment. This is the single A model. The holders are design to be joint together up to unlimited length in a A-B format. A model has no threaded rivnuts only the holes to line up to the B model. Witch and be bolted to this unit.

This model is Idela to be used by itself and can hold up to 6 umbrellas.

If you have more to hold, please check the WUHAD-400 for the dual unit or add the A model individually to the WUHAB-400, the B model.

All Wet Umbrella Holder come with Microfiber adsorbent mat and have a sealed base. Therefor will not leak water all over the floor when holding your wet umbrellas.

The open design had been selected so your umbrellas can dry quickly inside.

These units are 400mm high and 220mm wide, and weigh 3kg. therefor they will not fall over when full of umbrellas.

Wet Umbrella offer a 5 year warranty on this product.

If you need any assistance please use the messaging feature or contact us.